Premium Rubber Gym Flooring | Red Fleck 15mm [1m x 1m]

Premium Red Fleck Rubber Gym Flooring | 1m x 1m x 15mm

15% Red Fleck | Smoother Top Finish | Reversible | 1m x 1m x 15mm | Fire Tested - Efl (SGS)

The Premium Red Fleck Rubber Gym Flooring tile is 1m x 1m x 15mm of 100% SBR rubber with a PU binder and a 15% red fleck on one side. Its smoother top finish is more comfortable than our Commercial tiles for exercises that put you in direct contact with the floor - yoga, stretching and barefoot training.

The tile is reversible - the fleck is on one side and the other side has a smooth finish - and at 13.5kg per tile, 1000 kg/m³ and 62 Shore A it's dense, durable gym flooring. It absorbs shock, dampens noise, resists heat, ozone and weather, and it's fire tested by SGS to EN 13501-1:2018 with an Efl classification.

Commercial or Premium?

Our red fleck 1m x 1m x 15mm tile comes in two grades. Both are made from the same durable rubber, so the choice comes down to the surface finish and whether you want a reversible tile.

• Commercial Red Fleck - textured, non-slip surface, designed for single-sided use
• Premium Red Fleck (this tile) - smoother top finish that's more comfortable for barefoot work such as yoga and stretching, and reversible, with the fleck on one side and a smooth finish on the other

Both grades are built for everyday gym training. Go Premium if you'll spend time on the floor barefoot or want a tile you can flip; otherwise Commercial does the job. Still deciding? A Rubber Gym Flooring Sample lets you check the feel and finish before you order a full floor.

Key Features

• 15% red fleck - on one side, with a smooth finish on the reverse
• Smoother top finish - more comfortable for barefoot work such as yoga and stretching
• Reversible - use either side for extra versatility and a longer life
• 1m x 1m x 15mm, 13.5kg - one tile covers one square metre
• PU-bonded SBR rubber - 1000 kg/m³ density, 62 Shore A hardness - will not bend or deform
• Non-slip surface - secure footing during training
• Shock absorbent and noise reducing - protects your equipment and the floor underneath
• Heat, ozone and weather resistant - for long-lasting performance
• Fire tested - Efl classification to EN 13501-1:2018 (SGS)
• Waterproof, non-toxic and non-static - no chemical smell

Technical Specifications

Independently Tested & Certified

These tiles have been independently tested by SGS to the EN 13501-1:2018 fire safety standard and achieved a fire classification of Efl, indicating limited flame spread and low ignitability - a rating that makes them suitable for use in commercial gym environments.

The certification is available on request for gym owners, facility managers and commercial fit-outs - contact us and we'll send it through.

How Many Tiles Do I Need?

Each tile is 1m x 1m and covers 1 m², so the number of tiles you need is your floor area in square metres. Multiply the length by the width in metres, round up, and add a few spare tiles for cuts around walls, columns and equipment.

• Spare room or PT corner (about 12 square metres) - 13 tiles
• Single garage (about 18 square metres) - 19-20 tiles
• Double garage (about 36 square metres) - 38-40 tiles

Not sure of your area? Contact us with your measurements and we'll help you work out the tile count.

Installation Tips

1. Prepare the area: make sure the subfloor is clean, dry and level so the tiles sit flat
2. Start in a corner: work outward, pushing each tile firmly against the last so there are no gaps
3. Cut to fit: trim around corners and obstacles with a sharp utility knife and a straight edge, scoring several passes rather than forcing one cut
4. Secure if required: in high-traffic areas, fix the edges with adhesive or heavy-duty tape for added stability
5. Use both sides: the tile is reversible - turn it over to use the smooth side, or to get more life from a high-traffic spot

Want it done for you? We supply and install gym flooring across Sydney - contact us for a quote.

Frequently Asked Questions

What's the difference between Premium and Commercial red fleck flooring?
Both are 1m x 1m x 15mm tiles made from the same durable rubber. This Premium tile has a smoother top finish that's more comfortable for barefoot work such as yoga and stretching, and it's reversible. The Commercial Red Fleck has a textured, non-slip surface and is designed for single-sided use.

Can I use both sides?
Yes. The Premium tile is reversible: the red fleck is on one side and the other side has a smooth finish, so you can choose the look or flip a tile to extend its life.

How big and heavy is each tile?
Each tile is 1m x 1m x 15mm and weighs about 13.5kg (+/- 1%), with a density of 1000 kg/m³ and a hardness of 62 Shore A.

Is it fire rated?
Yes. The tiles are independently tested by SGS to EN 13501-1:2018 and rated Efl, which means low ignitability and limited flame spread. The certification is available on request for commercial fit-outs.

Is it waterproof?
Yes. It's waterproof, non-toxic and non-static with no chemical smell, and the rubber resists heat, ozone and weather.

What warranty does it come with?
A 2 year manufacturing warranty. Full terms are on our warranty page, and nothing here limits your rights under the Australian Consumer Law.

Delivery

Ships Australia-wide from our Sydney warehouse. Contact us for a freight quote to your location.

Shop More: Commercial Gym Flooring | Premium Black | Premium White Fleck | Premium Blue Fleck | Premium Grey Fleck
Complete Your Setup: Commercial Red Fleck | Rubber Gym Flooring Sample | EPDM Rubber Gym Flooring
Browse Full Range: Gym Flooring | Commercial Gym Equipment

Premium red fleck rubber flooring with a smoother, barefoot-friendly finish - reversible and built for daily training.