Premium Black Rubber Gym Flooring 1m | 15mm

Premium Black Rubber Gym Flooring | 1m x 1m x 15mm

Smoother Top Finish | Reversible | 1m x 1m x 15mm | 13.5kg Per Tile | Fire Tested - Efl (SGS)

The Premium Black Rubber Gym Flooring tile is 1m x 1m x 15mm of 100% SBR rubber bonded with PU, with a smoother top finish than our Commercial tiles. That smoother surface is more comfortable for exercises that put you in direct contact with the floor - yoga, stretching and barefoot training - and the tile is reversible, so both sides can be used.

Underneath the finish it's dense, durable gym flooring: 13.5kg per tile, 1000kg/m³, 62 Shore A and a bevelled edge. It absorbs shock, dampens noise, resists heat, ozone and weather, and it's waterproof, non-toxic and non-static with no chemical smell. Fire tested by SGS to EN 13501-1:2018 with an Efl classification.

Commercial or Premium?

Our black 1m x 1m x 15mm tile comes in two grades. Both are made from the same durable rubber, so the choice comes down to the surface finish and whether you want a reversible tile.

• Commercial Black - textured, non-slip surface, designed for single-sided use
• Premium Black (this tile) - smoother top finish that's more comfortable for barefoot work such as yoga and stretching, and reversible, so both sides can be used

Both grades are built for everyday gym training. Go Premium if you'll spend time on the floor barefoot or want a tile you can flip; otherwise Commercial does the job. Still deciding? A Rubber Gym Flooring Sample lets you check the feel and finish before you order a full floor.

Key Features

• Smoother top finish - more comfortable for barefoot work such as yoga and stretching
• Reversible - use either side for extra versatility and a longer life
• 1m x 1m x 15mm, 13.5kg - one tile covers one square metre
• PU-bonded SBR rubber - 1000kg/m³ density, 62 Shore A hardness - will not bend or deform
• Non-slip surface - secure footing during training
• Shock absorbent and noise reducing - protects your equipment and the floor underneath
• Heat, ozone and weather resistant - for long-lasting performance
• Fire tested - Efl classification to EN 13501-1:2018 (SGS)
• Waterproof, non-toxic and non-static - no chemical smell

Technical Specifications

Independently Tested & Certified

These tiles have been independently tested by SGS to the EN 13501-1:2018 fire safety standard and achieved a fire classification of Efl, indicating limited flame spread and low ignitability - a rating that makes them suitable for use in commercial gym environments.

The certification is available on request for gym owners, facility managers and commercial fit-outs - contact us and we'll send it through.

How Many Tiles Do I Need?

Each tile is 1m x 1m and covers 1 m², so the number of tiles you need is your floor area in square metres. Multiply the length by the width in metres, round up, and add a few spare tiles for cuts around walls, columns and equipment.

• Spare room or PT corner (about 12 square metres) - 13 tiles
• Single garage (about 18 square metres) - 19-20 tiles
• Double garage (about 36 square metres) - 38-40 tiles

Not sure of your area? Contact us with your measurements and we'll help you work out the tile count.

Installation Tips

1. Prepare the area: make sure the subfloor is clean, dry and level so the tiles sit flat
2. Start in a corner: work outward, pushing each tile firmly against the last so there are no gaps
3. Cut to fit: trim around corners and obstacles with a sharp utility knife and a straight edge, scoring several passes rather than forcing one cut
4. Secure if required: in high-traffic areas, fix the edges with adhesive or heavy-duty tape for added stability
5. Use both sides: the tile is reversible - turn it over to get more life from a high-traffic spot

Want it done for you? We supply and install gym flooring across Sydney - contact us for a quote.

Frequently Asked Questions

What's the difference between Premium and Commercial black flooring?
Both are 1m x 1m x 15mm tiles made from the same durable rubber. This Premium tile has a smoother top finish that's more comfortable for barefoot work such as yoga and stretching, and it's reversible. The Commercial Black has a textured, non-slip surface and is designed for single-sided use.

Can I use both sides?
Yes. The Premium tile is reversible and can be used on both sides, which adds versatility and extends its life.

How big and heavy is each tile?
Each tile is 1m x 1m x 15mm and weighs about 13.5kg (+/- 1%), with a density of 1000kg/m³ and a hardness of 62 Shore A.

Is it fire rated?
Yes. The tiles are independently tested by SGS to EN 13501-1:2018 and rated Efl, which means low ignitability and limited flame spread. The certification is available on request for commercial fit-outs.

Is it waterproof?
Yes. It's waterproof, non-toxic and non-static with no chemical smell, and the rubber resists heat, ozone and weather.

What warranty does it come with?
A 2 year manufacturing warranty. Full terms are on our warranty page, and nothing here limits your rights under the Australian Consumer Law.

Delivery

Ships Australia-wide from our Sydney warehouse. Contact us for a freight quote to your location.

Shop More: Commercial Gym Flooring | Premium White Fleck | Premium Blue Fleck | Premium Red Fleck | Premium Grey Fleck
Complete Your Setup: Commercial Black | Rubber Gym Flooring Sample | EPDM Rubber Gym Flooring
Browse Full Range: Gym Flooring | Commercial Gym Equipment

Premium black rubber flooring with a smoother, barefoot-friendly finish - reversible and built for daily training.