Max Strength V2 Power Rack

Max Strength V2 Power Rack

60 × 60 Steel Frame | 26mm Holes | 35 Height Positions | Multi-Grip Chin-Up Bar

PLEASE NOTE: PRE ORDER ITEM

ETA: November 12th

The Max Strength V2 is a four-post training cage built for progressive overload over years, not months. The 60 × 60 × 2mm Q235 steel frame gives it the rigidity heavy compound work demands, and 35 adjustment positions mean the bar sits exactly where you want it for squats, bench, overhead press and rack pulls — not near enough.

At a metre square and 2.1m tall, it is one of the most compact true four-post cages you can buy — it fits under a standard ceiling and into a single parking bay of a garage, with two 38cm safety arms for solo training and an integrated multi-grip chin-up bar on top.

Key Features

• 60 × 60 × 2mm Q235 steel frame — commercial-gauge tubing throughout
• Compact 1.0m × 1.0m footprint, 2.1m tall — a full cage that fits standard ceilings and tight floors
• 26mm hole system with 35 height positions — fine adjustment for every lift and every lifter
• 2 × 38cm heavy-duty safety arms — confident solo training inside the cage
• Integrated multi-grip chin-up bar — wide, close and neutral grips
• Takes the full 60mm attachment range — grows with your training

Technical Specifications

Attachments — Sold Separately

This rack is 60 × 60mm with 26mm holes, so it takes our entire 60mm attachment range. Our 75mm attachments are built for a heavier frame and will not fit.

• Add 60mm J-Hooks (26mm pin) — spare or replacement hooks, tested past 800kg. Take the 26mm version for this rack, not the 25mm.
• Add 60mm Spotter Arms — rubber-lined arms for pressing outside the cage
• Add 60mm Jammer Arms — plate-loaded pressing, rowing and explosive work
• Add 14" Plate Storage Sleeves — plate storage straight onto the uprights, sold singly
• Browse all Power Rack Attachments

Warranty

• 12 MONTHS MINIMUM

Full terms, exclusions and the claims process are set out on our Warranty Policy page. Nothing here limits your rights under the Australian Consumer Law.

Frequently Asked Questions

How much ceiling height do I need?
The rack stands 2100mm tall, so it clears a standard 2.4m ceiling with room above the multi-grip bar — allow head clearance if you plan full chin-ups over the bar.

Which attachments fit this rack?
The 60mm range. The frame is 60 × 60 tube with 26mm holes, so 60mm spotter arms, jammer arms and plate sleeves mount straight on, and J-hooks need the 26mm pin version. Anything listed for 75mm uprights is a different rack family and will not fit.

Can I train alone on it?
That is what the cage is for. Set the two 38cm safety arms just below your working depth and a failed rep lands on steel rather than on you.

What can I train in it?
Squats, bench press, overhead press, rack pulls and pull-ups from the integrated multi-grip bar. Add jammer arms and you get pressing, rowing and hinge work from the same frame.

Do I need to bolt it down?
At around 51kg of frame it is stable free-standing for controlled barbell work, and lighter to move than most cages. Bolt it down if you plan kipping pull-ups or regularly bailing heavy bars — that is when lateral forces get interesting.

What flooring should go under it?
Rubber. It protects the slab, cuts noise and stops the rack walking. See our commercial gym flooring range.

Delivery & Assembly

Ships Australia-wide from our Sydney warehouse in two cartons (27kg + 25.5kg). Professional delivery and assembly is available through our own technician team in Sydney. Contact us for a freight quote to your location.

Commercial Fit-Outs & Bulk Orders

Outfitting a gym, studio or facility? Contact us for our full commercial catalogue, bulk pricing and a free gym design consultation.

Shop More: Power Racks & Cages | Rack Attachments
Compare: Commercial Grade Power Rack | Reload Pro Half Rack (75mm)
Complete Your Setup: Barbells | Plates | Benches | Gym Flooring

Thirty-five positions, one cage, every lift that matters.

Pre Order

• This item is available to pre order
• The shipping date from our Sydney warehouse is November 2026
• Please note this is an estimation and may change slightly
• Change-of-mind refunds aren’t available on pre-order items — but if the arrival date moves materially, you can switch to an in-stock item or take a full refund
• Your rights under the Australian Consumer Law are not affected