Reload CrossFit Plate Sleeve - Commercial Grade

Reload CrossFit Plate Sleeve — 14" Storage Sleeve

Fits 60 × 60mm Uprights | 50mm Olympic Fit | Slide-On Pin Lock | Sold Singly

Plates on the floor are a trip hazard and a tidiness problem. The Reload 14" Plate Storage Sleeve bolts that problem to the side of your rack instead — a single heavy-gauge steel post that slides onto a 60 × 60mm upright and locks with a pin, no tools and no drilling.

At 14 inches it holds a genuinely deep stack, and because it takes standard 50mm Olympic plates it will carry whatever you already own — rubber, iron, urethane or bumper.

Sold individually. Most gyms run two to four per rack — one pair per side keeps the loading zone within arm's reach of the bar.

Will It Fit Your Rack?

This sleeve is built for 60mm × 60mm uprights. Measure your frame before ordering — the two rack families take different attachments and they are not interchangeable.

• Fits: Commercial Grade Power Rack (OK9180) — 60 × 60 × 2mm tubing
• Fits: Max Strength V2 Power Rack — 60 × 60 steel frame
• Fits: any other rack or rig with 60 × 60mm uprights — measure to confirm
• Does not fit 75mm frames. For those, use the 75 × 75mm Olympic Plate Sleeves instead.

Key Features

• 14" powder-coated steel post — heavy gauge, holds a loaded stack without flexing
• Universal 50mm Olympic fit — rubber, iron, urethane and bumper plates all slide on
• Slide-on pin lock — mounts and repositions in seconds, no tools required
• Reinforced support bracket — spreads the load into the upright rather than the pin
• Matte black powder coat — matches the Reload rack and rig finish
• Frees up floor space — storage goes vertical, right where you load the bar

Technical Specifications

Warranty

• 12 MONTHS

Full terms, exclusions and the claims process are set out on our Warranty Policy page. Nothing here limits your rights under the Australian Consumer Law.

Who It Suits

• CrossFit boxes and functional fitness centres running rigs
• Commercial gyms keeping plates off the floor between sessions
• Boutique and PT studios where floor space is the constraint
• Garage and home gyms built around a Reload rack

Frequently Asked Questions

How do I know if it fits my rack?
Measure the upright. If it is 60mm × 60mm square tube, this sleeve fits. If it is 75mm, you need the 75mm plate sleeves instead. Those are the two frame sizes we sell attachments for.

Is this sold as a pair?
No — single sleeve. Add the quantity you need; most racks end up running two to four.

How many plates will it hold?
That depends entirely on plate thickness. Fourteen inches is a deep post, but bumper plates are far thicker than iron or tri-grip, so a stack of bumpers will fill it well before a stack of iron does.

Do I need tools to install it?
No. It slides onto the upright and locks with the included pin — on and off in seconds if you need to reconfigure the rack.

Will it fit a non-Reload rack?
If that rack uses 60 × 60mm uprights, very likely. We can only guarantee the fit on our own frames, so measure first — and if you are unsure, send us a photo and we will tell you.

What else fits the same rack?
The rest of the 60mm range — spotter arms, jammer arms and 60mm J-hooks. Check your hole size on the J-hooks — they come in 25mm and 26mm.

Delivery

Ships Australia-wide from our Sydney warehouse, boxed and ready to mount — no assembly required. Click & Collect available in Sydney. Contact us for a freight quote to your location.

Commercial Fit-Outs & Bulk Orders

Kitting out a rig line or a full gym floor? Contact us for bulk pricing on sleeves and attachments.

Shop More: Power Rack Attachments | Power Racks & Cages
Fits These Racks: Commercial Grade Power Rack | Max Strength V2 Power Rack
Complete Your Setup: 60mm Spotter Arms | 60mm Jammer Arms | Olympic Plates | Gym Flooring

Plates on the rack, not on the floor.