Odin 2.0 Ice Bath Chiller Replacement Filters

Odin 2.0 Ice Bath Chiller Replacement Filters

Large 4.5" x 10" Pleated Paper Cartridges | 20 Micron | Pack of 5

These large-format replacement cartridges from Chill Bunny measure 110mm wide by 240mm long (4.5" x 10") with a 27mm inner hole. Chill Bunny makes them for many commercial chillers, including some Odin 2.0 units, so check the size of your current cartridge before you order.

The double open-ended pleated paper media gives a large surface area to trap dirt and debris down to 20 microns, and it resists bacteria and water treatment chemicals. Each pack holds five cartridges, so you have spares ready for regular changes in a busy recovery space or a home cold plunge.

Key Features

• 20 micron pleated paper media traps dirt and fine debris
• Double open-ended pleated design for a large filtering surface
• Resistant to bacteria and water treatment chemicals
• 110mm x 240mm (4.5" x 10") with a 27mm inner hole
• Fits many commercial chillers, including some Odin 2.0 units
• Pack of 5 for regular replacement cycles

Specifications

Warranty

These filter cartridges are covered by a 12-month warranty against manufacturing defects. Filters are consumable parts, so normal clogging and the need for regular replacement are not defects. Full terms are on our Warranty Policy page. Nothing here limits your rights under the Australian Consumer Law.

Frequently Asked Questions

Will these fit my chiller?
Measure your current cartridge: these are 110mm wide by 240mm long with a 27mm inner hole, open at both ends. Chill Bunny lists them for many commercial chillers, including some Odin 2.0 units, but not every Odin 2.0. If yours is a different size, send us a photo of your old filter and the chiller's model plate and we'll confirm fit.

How often should I replace them?
Chill Bunny recommends a new cartridge about every 60 uses at home, depending on water quality, location and how often the bath is used, and weekly in high-traffic commercial facilities. Replace it sooner if it looks dirty or the flow rate drops.

I bought a Chill Bunny Ice Bath from Fitness Hero. Is this the right filter?
Check the size first. The residential chiller on the Chill Bunny Ice Bath we sell takes a 254 x 64mm cartridge, which is our Premium Ice Bath Chiller Replacement Filters, not this one.

What is the difference between the Odin 2.0 and Odin 3.0 filters?
Size. This Odin 2.0 cartridge is 110mm x 240mm (4.5" x 10"), while the Odin 3.0 filters are 125mm x 180mm. Both are pleated paper cartridges sold in packs of 5.

Delivery

Ships Australia-wide from our Sydney warehouse.

Shop More

Need a different size? See the Odin 3.0 Ice Bath Chiller Replacement Filters, browse all Ice Bath Accessories & Replacement Filters, or see the full Performance & Recovery range.