ODIN3.0
4 x
$68.75 AUD
From
$10
4 x
$68.75 AUD
Same day dispatch on orders before 11am. Over 500 depot collection spots Australia wide
Get your money back if you are not entirely happy, within 14 days
Excellent customer service, live support 24/7. Australian based support
Afterpay, Paypal & Zip Pay Available
Flexible Equipment Financing From Fitness Hero with GRENKE125 x 180mm Pleated Paper Cartridges | 20 Micron | Pack of 5
These Chill Bunny replacement cartridges measure 125mm by 180mm and suit a range of ice bath and spa chillers, including some Odin 3.0 models. Check the size of the cartridge in your unit before you order, because Odin chillers do not all take the same filter.
The double open-ended pleated paper media gives a large surface area to capture debris down to 20 microns, and it resists bacteria and water treatment chemicals. A pack of five keeps spares on hand for regular changes, whether you run a home cold plunge or a busy recovery space.
| BRAND | Chill Bunny |
| TYPE | Ice bath / spa chiller replacement filter cartridge |
| DIMENSIONS | 125mm x 180mm |
| FILTRATION | 20 micron |
| MEDIA | Pleated paper, resistant to bacteria and chemicals |
| DESIGN | Double open-ended, pleated |
| COMPATIBILITY | A range of units, including some Odin 3.0 models (match your current cartridge size) |
| PACK SIZE | 5 cartridges |
| REPLACEMENT | Residential: about every 60 uses. Commercial: weekly in high-traffic areas. Sooner if dirty or flow drops |
These filter cartridges are covered by a 12-month warranty against manufacturing defects. Filters are consumable parts, so normal clogging and the need for regular replacement are not defects. Full terms are on our Warranty Policy page. Nothing here limits your rights under the Australian Consumer Law.
Will these fit my chiller?
Check your current cartridge: these measure 125mm x 180mm and are open at both ends. Chill Bunny lists them for a range of units including some Odin 3.0 models, but not every Odin 3.0. If yours is a different size, send us a photo of your old filter and the chiller's model plate and we'll confirm fit.
How often should I replace them?
Chill Bunny recommends a new cartridge about every 60 uses at home, depending on water quality, location and how often the bath is used, and weekly in high-traffic commercial facilities. Replace it sooner if it looks dirty or the flow rate drops.
What is the difference between the Odin 3.0 and Odin 2.0 filters?
Size. This Odin 3.0 cartridge is 125mm x 180mm, while the Odin 2.0 filters are 110mm x 240mm (4.5" x 10") with a 27mm inner hole. Both are pleated paper cartridges sold in packs of 5.
I bought a Chill Bunny Ice Bath from Fitness Hero. Is this the right filter?
Check the size first. The residential chiller on the Chill Bunny Ice Bath we sell takes a 254 x 64mm cartridge, which is our Premium Ice Bath Chiller Replacement Filters, not this one.
Ships Australia-wide from our Sydney warehouse.
Need a different size? See the Odin 2.0 Ice Bath Chiller Replacement Filters, browse all Ice Bath Accessories & Replacement Filters, or see the full Performance & Recovery range.
