SP-PIN-8-75
4 x
$2.50 AUD
From
$10
4 x
$2.50 AUD
Same day dispatch on orders before 11am. Over 500 depot collection spots Australia wide
Get your money back if you are not entirely happy, within 14 days
Excellent customer service, live support 24/7. Australian based support
Afterpay, Paypal & Zip Pay Available
Flexible Equipment Financing From Fitness Hero with GRENKE8mm x 75mm | 8mm x 90mm | 10mm x 90mm | Magnetic Knob | Coiled Lanyard with Clip
The part that goes missing first on any pin-loaded machine. This magnetic selector pin replaces a lost or bent weight stack pin on Reload machines: a machined aluminium knob with a magnet that holds the pin firmly in the stack, a steel shaft, and a coiled lanyard with a clip that tethers it to the machine so it can't walk off between sets.
Three sizes to match the stack it's going into - 8mm x 75mm, 8mm x 90mm and 10mm x 90mm - with the length measured from under the knob to the tip. Match the pin that came with the machine; if that's long gone, the guide below shows how to measure.
| Sizes | 8mm x 75mm, 8mm x 90mm, 10mm x 90mm (diameter x shaft length) - select above |
| Shaft Length | Measured from under the knob to the tip |
| Knob | Machined aluminium with built-in magnet |
| Shaft | Steel |
| Tether | Black coiled lanyard with keyring clip |
| Fits | Weight stacks with an 8mm or 10mm selector hole - measure your existing pin to confirm |
| Sold As | Single pin |
Measure your old pin in two places: the shaft diameter (the shaft, not the knob - it'll be 8mm or 10mm) and the length from the underside of the knob to the tip, not the overall length. If the original pin is lost, measure from the face of the stack plate straight through to the far side of the selector rod: the pin has to pass fully through the plate and seat in the rod. Round up to the nearer of 75mm or 90mm. If your pin is a size we don't list, contact us with your machine's model code (on the frame label) and we'll source the right one.
| Parts | 12 months - manufacturing defects |
Full terms are on our Warranty Policy page.
Will it fit my machine?
If your stack takes an 8mm or 10mm pin, yes - the diameter and length are the only things to match. Check the shaft of your existing pin with a ruler or calipers, or send us the model code and we'll confirm.
What does the magnet do?
It holds the knob flat against the stack so the pin can't vibrate out or sit half-engaged, which is how selector pins get bent and stacks get dropped.
Why the lanyard?
Because pins walk. Clip it to the frame or stack guard and the pin stays with the machine instead of in someone's pocket.
Do you stock other sizes?
These three are the sizes we keep on the shelf. For other diameters, longer shafts or a full machine's worth, contact us and we'll quote from the supplier's parts list.
Shop More: Spare Parts | Commercial Gym Equipment | In Stock Pin Loaded Machines
