Pin Loaded Shoulder Press - Legacy Series

Legacy Series Shoulder Press - Commercial Pin Loaded Machine

Dual-Position Grips | Enclosed 100kg Stack | 3mm Steel Frame | 10-Year Frame Warranty

PLEASE NOTE: PRE ORDER ITEM

ETA: October 26th

The Legacy Series Shoulder Press gives you heavy overhead pressing without the balance problem. Seated against a contoured backrest, you press through a guided arc that keeps the load over the shoulder joint - so the deltoids and triceps take the work and the lower back stays out of it.

Dual-position grips let you press with a neutral grip for a shoulder-friendly path, or a wider pronated grip to bias the side delts. The adjustable seat sets the start position at shoulder height for lifters of any size, which is what makes a machine press safe to push hard on.

Built on a 3mm commercial steel frame at 285.5kg with a fully enclosed weight stack and a maintenance-free pulley system, it's made for premium gym floors that get used all day.

Key Features

• Guided overhead press: the path stays over the shoulder joint, so you can load heavy without stabilising a bar.
• Dual-position grips: neutral or pronated to shift emphasis across the delts.
• Adjustable seat height: lines the handles up at shoulder height for every user.
• Contoured backrest: supports the spine and posture under overhead load.
• Enclosed metal weight stack: premium look with no exposed plates.
• 100kg pin-loaded stack: 96kg stack plus 4.6kg top plate, one-pin changes - upgradeable to 140kg at $10 per kilogram on made-to-order builds.
• Maintenance-free pulley system: quiet, smooth resistance with minimal servicing.
• 3mm heavy-duty steel frame: built for daily commercial traffic.
• Custom colours: 16 frame colours and 12 upholstery colours available on made-to-order builds.

Technical Specifications

Ideal For

• Commercial gyms and premium fitness clubs building out a shoulder and pressing zone
• Bodybuilding and physique floors chasing delt hypertrophy
• Strength and conditioning centres and high-performance facilities
• Corporate, hotel and premium home gyms wanting a finished, enclosed-stack look

Warranty

FAQs

Machine shoulder press or dumbbell press - which is better?
Dumbbells build stabilising strength but cap how heavy most people can safely press overhead. The machine removes the balance demand, so you can load the delts harder and push closer to failure without a spotter. Most programs use both.

Which grip should I use?
Neutral (palms facing) is the shoulder-friendly option and suits most lifters, especially anyone with cranky shoulders. Pronated (palms forward) with a wider hand position puts more emphasis on the side delts.

Is it good for lifters with shoulder issues?
The guided path, back support and neutral-grip option make it one of the more joint-friendly ways to press overhead. As always, anyone managing an injury should clear it with their physio first.

How is it different from the Legacy Shoulder & Chest Press?
This is a dedicated shoulder press with a fixed overhead path. The combo unit adjusts between a shoulder press and a chest press on one frame - handy where floor space is tight. See the Legacy Shoulder & Chest Press.

Can I upgrade the weight stack?
Yes - on made-to-order builds the 100kg stack can be increased to 140kg at $10 per kilogram. Get in touch to spec it.

Can I customise the frame and upholstery?
Yes - made-to-order builds are available in 16 frame colours and 12 upholstery colours on an 8-12 week lead time. See the full colour chart below.

Do you offer delivery and installation?
Yes - Australia-wide delivery, with professional installation through our own technician team in Sydney. At 285.5kg this is one to let our team place and level. Contact us to discuss freight access and site requirements.

Delivery & Installation

Australia-wide delivery on a 285.5kg commercial machine, with professional installation available through our own technician team in Sydney. Contact us for a full quote including freight, installation and customisation support.

Commercial Fit-Outs & Bulk Orders

Outfitting a gym, studio or facility? Contact us for our full commercial catalogue, bulk pricing and a free consultation.

Shop More: Legacy Series | Pin Loaded Machines | Pair It: Legacy Lateral Raise | Compare: Legacy Shoulder & Chest Press
Complete Your Setup: Legacy Chest Press | Gym Flooring
Browse Full Range: Made To Order Machines

Press heavy, press safe - overhead strength without the balancing act.

Made To Order

RELOAD By Fitness Hero
Commercial Grade custom made to order products

You can now design your own custom made equipment to suit your own requirements. Simply let us know the colour or finish you would like on the products and we will do the rest.

Once an order has been placed, your equipment will be manufactured upon request. This process generally takes around 14 days depending on the size of each product.

Once the production is finished, it can take 4-6 weeks to be delivered to Sydney. Once it has arrived in our warehouse, we will arrange shipment to your location. Prior arrangement can also be made to ship items direct to you.

Estimated start to finish process: 8 - 12 weeks

Custom Design

Some of our ranges are fully colour customisable to suit your needs - 16 frame colours and 12 upholstery colours. Just get in touch when ordering to let us know which colour you require and we will do the rest.

Weight stack upgrades: stacks can be increased to 140kg at $10 per kilogram.

Bulk orders: if you have an enquiry regarding multiple items, please contact us as we may be able to provide a bulk discount. If you need advice on building a home gym, studio or commercial gym, we can also provide a free consultation.

Our commercial grade equipment also comes with a 10-year warranty!

• FRAME: 10 YEARS
• GUIDE RODS & BEARINGS: 3 YEARS
• UPHOLSTERY & PARTS: 12 MONTHS

Please reach out to our customer service if you have any questions or require some advice & one of our friendly staff members will be happy to help you.